This product, in powder form, is recommended for polishing all types of marble. Thanks to the use of high-level abrasive substances combined with sealant, synthetic and crystallizing chemical substances, a perfect chemical-mechanical polish is achieved. The complete absence of oxalic acid avoids that the heating of the marble, due to the friction, develops “oxalic acid burnings" marks. At the same time, the presence of metallic powder assures a seal that covers even the smallest surface imperfections.
The granular dimensions of the powder (fineness) have been exhaustively researched, formulated and balanced to allow for the fastest and most economical machine polishing on marble that is pre-polished at 400 or even 800 grain; by this way a perfect, completely stable, long-lasting polish is obtained.
How to use:
Grind and clean the surface and remove any mechanical residue: nails, brick dust, crushed stone, etc. Apply 30 to 60 grams of product per square meter of surface, sprinkling the powder over surface and place the machine’s felt pad on top of the powder, then dampen the area till to obtain a milky/creamy consistency. Work 1 - 2 square meters by time. Once the polishing phase is completed on the entire surface to be treated, remove the residual patina by washing with Neutrex diluted. Rinse with clear water. After drying (24 to 48 hours) apply the impregnator to preserve the polish and to avoid staining from oil, food, etc.
Packaging: 1 kg & 10 kg
