Adheres even on difficult surfaces or humid materials where the polyester adhesive have poor or null adhesion.
Its tixotropic characteristic makes is suitable for application on vertical surfaces and the negligible shrinkage allows the reparation of deep micro-crackings and hollows by only one operation.
Indications: Bonding of any kind of stone and ceramic materials, both natural and synthetic, between them
or to heterogeneous supports such as metal, wood, glass, concrete.
How to use: The surfaces to be bonded must be clean, dry, without trace of dust or alien substances.Take 2 parts of component A, resin, and 1 part of component B, catalyst,(i.e 100 grams of component A and 50 grams of component B) and mix carefully at least 3 minutes. Use two different tools for taking the components A and B. For the correct catalysis comply scrupulously with the mixing ratio as above in small quantity(400 to 500 grams each time) thus avoiding a too short time before the hardening reaction.. Do not apply glue already in phase of hardening reaction. Do not use at temperature lower than 10°C(50°F). The hardening takes place 3 to 5 hours according to the environment conditions; it is suggested to move the bonded pieces after 8 to 10 hours and the grinding/polishing after 24 hours.
Packaging: Set A+B kg.1.5
